TRX-4M New Bronco Interior (3D printed）

GRC 3D printing simulates internal control seats with motor cooling fan for 1:18 TRX4M BRONCO RC remote control car G179W

Characteristic description:

1. The kit is designed according to the interior details of the real car, maximizing the restoration of the details of the real car. At the same time, it also optimizes the proportion adaptation for the T RX-4M strong carriage shell. Under the limited space size of the original factory, the legroom of the seat is designed, leaving room for the puppet's legroom, and the puppet does not need to be "amputated" when getting on the car; Original and authentic central armrest kit. Hand brake, dual gear lever, cup holder and other forms, with full details.

2. The unique interior design incorporates the design of a motor cooling fan, and a small-sized high speed fan direct blowing motor ensures stable operation of the motor after installing the interior.

3. The interior rear cover adopts a screw free quick release structure, which can easily remove and replace the battery or plug in and out the power plug. (Note that the battery cable should be placed in the middle, as shown in the diagram at the end of the page)

4. The optimized structure makes installation very simple, requiring only 8 screws to complete all installations.

Specifications:

Applicable: TRX-4M BRONCO

Material: High toughness plastic (3D printing)

No.: G179W

Weight: 58g

Installation: Please refer to the end of this page for installation instructions.

Note: This kit only maintains maximum compatibility with the original electrical equipment/battery and frame status of the TRX-4M BRONCO model. If the frame has been modified with other auxiliary factory accessories, it is possible to make DIY modifications. If you mind, please do not place an order!

Frequently asked questions:

1. This kit must be paired with GRC's TRX-4M Liema mudguard to be used. Users who have not yet installed it can click here to purchase.

2. Only the original battery size (or smaller than the original battery size) installation is supported, and the original battery strap needs to be removed during installation.

3. The center console section is made for 3D printing, and residual solvents may remain on the surface of the printed part during the production process. When installing stickers, it is necessary to clean the sticker area and cooperate with 3M double-sided adhesive to better fit:

4. The center console part is made using 3D printing technology. Due to inconsistent batches, there may be printed textures on the surface of the components and a small amount of water stains during printing treatment (this issue cannot be returned as a product issue). Users with higher requirements can sandpaper or spray water to repair soil. Mind taking photos with caution.

5. Due to different batches of printed products, there may be design optimization adjustments between batches. If the adjustment range is small and the difference in image display is small, no separate photo display notice will be given (the adjustment range will be described by taking photos separately). We kindly take photos with caution.

6. After proportional scaling, the central axis of the steering wheel is too small to rotate. Do not forcefully twist it.

7. The strength of 3D printing materials can meet basic product usage scenarios, but high-speed collisions and desktop drops can cause product fracture and damage. Do not use them with force.

8. The working voltage of the matched cooling fan is 5-8V, which can be directly plugged into the spare socket received by the TRX4M factory for direct use. If the DIY is powered by an external power supply, please do not exceed the voltage of 2S (8.4V) for use!