GPM Brass Pendulum Wheel Weights (16pc Set)

9mm Hex Adapter-2PCS Stainless Steel Cap Head Screw 2.5x12-4PCS 

Stainless Steel Screw Shaft M4x2.5x11.8-2PCS 

5mm Shims-2PCS 5mm Metal Washer-2PCS 

10mm Hex Socket Screw-2PCS 

Product major function & usage: To increase the weight of each wheel to stabilise the wheel, enlarge the angle of crawling, especially when the car is digging into some low lying area land spaces, grab the ground firmly and smoothly drive back to level. 

Major advantages of upgrading to this product: 

 1. Stainless steel rolling beads design to carry additional weight 72 to 92 grams for one of each of the wheels keeping the gravity carrying with weight downward towards the ground for better grabby performance. 

 2. The high quality of the stainless steel is very suitable for muddy watery track with no fears of getting rusty. 

 3. Compare with no outer case design, each side of tire +wheel can have weight increase of 72 to 92 grams. 

 4. To adjust the weight of the pendulum wheel, there are 5 removable stainless steel beads, weighing 4g each. 

The features of general appearance of this product: 

 1. Stainless steel rolling beads design to carry additional weight 72 to 92 grams for one of each of the wheels keeping the gravity carrying with weight downward towards the ground for better grabby performance. 

 2. The high quality of the stainless steel is very suitable for muddy watery track with no fears of getting rusty. 

Other special notes and comments: 

Install onto front & rear outer case of the knuckles, this part does not appear in the original and it is sophisticated design for TRX 4 by GPM. The pendulum design offers a consistent downward force. 

Weight per piece : 92g (with rolling beads). 

9mm wide hex adpater (4mm wider than original). 

We use a quality light weight high tensile strength aluminium 6061 T6 and is then anodised with scratch resistant colour.